FRONT LOWER SUSPENSION ARM > INSTALLATION

1. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

2. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

3. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

4. INSTALL FRONT WHEELS

5. STABILIZE SUSPENSION

6. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

7. INSTALL NO. 1 ENGINE UNDER COVER

8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT