FRONT SUSPENSION MEMBER > INSTALLATION

1. INSTALL FRONT STABILIZER BAR

2. INSTALL FRONT SUSPENSION MEMBER BRACE

3. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

4. TEMPORARILY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

5. INSTALL STEERING LINK ASSEMBLY

6. INSTALL FRONT CROSS MEMBER SUB-ASSEMBLY

7. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

8. INSTALL FRONT SUSPENSION MEMBER REAR BRACE LH

9. INSTALL FRONT SUSPENSION MEMBER REAR BRACE RH

10. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY LH

11. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

12. INSTALL FRONT ENGINE MOUNTING BRACKET LOWER REINFORCEMENT

13. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

14. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

15. CONNECT TIE ROD END SUB-ASSEMBLY LH

16. CONNECT TIE ROD END SUB-ASSEMBLY RH

17. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

18. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

19. CONNECT NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

20. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

21. INSTALL COLUMN HOLE COVER SILENCER SHEET

22. INSTALL FRONT WHEELS

23. STABILIZE SUSPENSION

24. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

25. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

26. INSTALL FRONT LOWER BUMPER ABSORBER

27. INSTALL REAR ENGINE UNDER COVER LH

28. INSTALL REAR ENGINE UNDER COVER RH

29. INSTALL FRONT NO. 3 ENGINE UNDER COVER

30. INSTALL NO. 1 ENGINE UNDER COVER

31. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT