EXHAUST PIPE > INSTALLATION

1. INSTALL FRONT EXHAUST PIPE ASSEMBLY (w/ Exhaust Heat Recirculation System)

2. INSTALL FRONT EXHAUST PIPE ASSEMBLY (w/o Exhaust Heat Recirculation System)

3. INSTALL HEATED OXYGEN SENSOR

4. INSTALL FRONT CENTER FLOOR BRACE

5. INSTALL FRONT NO. 3 ENGINE UNDER COVER

6. INSTALL TAIL EXHAUST PIPE ASSEMBLY

7. ADD COOLANT (for Engine w/ Exhaust Heat Recirculation System)

8. INSPECT FOR COOLANT LEAK (for Engine w/ Exhaust Heat Recirculation System)

9. INSPECT FOR EXHAUST GAS LEAK