HV RELAY ASSEMBLY > REMOVAL

1. REMOVE SERVICE PLUG GRIP

2. REMOVE INVERTER COVER ASSEMBLY LH (w/ Cover)

3. REMOVE INVERTER COVER

4. CHECK TERMINAL VOLTAGE

5. INSTALL INVERTER COVER

6. INSTALL INVERTER COVER ASSEMBLY LH (w/ Cover)

7. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

8. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)

9. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)

10. REMOVE DECK FLOOR BOX LH (w/o Woofer)

11. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

12. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

13. REMOVE REAR NO. 1 FLOOR BOARD

14. REMOVE REAR SEATBACK ASSEMBLY RH

15. REMOVE REAR DOOR SCUFF PLATE RH

16. REMOVE REAR SEAT SIDE GARNISH RH

17. REMOVE HYBRID VEHICLE BATTERY SHIELD SHEET

18. REMOVE REAR FLOOR BOARD SPACER

19. REMOVE NO. 1 HYBRID BATTERY EXHAUST DUCT

20. REMOVE UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

21. DISCONNECT FRAME WIRE

22. REMOVE HYBRID BATTERY JUNCTION BLOCK ASSEMBLY