CAN COMMUNICATION SYSTEM > Check CAN Bus Line for Short to GND (RHD Models)

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FOR SHORT TO GND IN CAN BUS LINE (CAN NO. 2 J/C)

CHECK FOR SHORT TO GND IN CAN BUS LINE (CAN NO. 2 J/C)

CHECK FOR SHORT TO GND IN CAN BUS LINE (CAN NO. 1 J/C)

CHECK SHORT TO GND IN CAN BUS LINE (CAN NO. 1 J/C)

CHECK SHORT TO GND IN CAN BUS LINE (CAN NO. 3 J/C)

CHECK SHORT TO GND IN CAN BUS LINE (CAN NO. 3 J/C)

CHECK FOR SHORT TO GND IN CONNECTED COMPONENT (ECU, SENSOR)