FRONT DOOR BELT MOULDING > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

8. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

9. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH

10. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

11. REMOVE DOOR ARMREST COVER (for Driver Side)

12. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)

13. REMOVE DOOR ASSIST GRIP COVER (for Front Passenger Side)

14. REMOVE DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)

15. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

16. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)

17. REMOVE FRONT DOOR TRIM BRACKET (for Driver Side)

18. REMOVE FRONT DOOR TRIM BRACKET (for Front Passenger Side)

19. REMOVE FRONT DOOR SERVICE HOLE COVER

20. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

21. REMOVE FRONT DOOR GLASS RUN

22. REMOVE FRONT DOOR FRONT LOWER FRAME UPPER COVER

23. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY