DTC    P0A84-123    Hybrid Battery Pack Cooling Fan 1

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK DTC OUTPUT (HV)

PERFORM ACTIVE TEST USING INTELLIGENT TESTER

CHECK HARNESS AND CONNECTOR (BATTERY COOLING BLOWER - BATTERY SMART UNIT)

CHECK BATTERY COOLING BLOWER ASSEMBLY (VOLTAGE)

CHECK NO. 2 INTEGRATION RELAY (BATT FAN)

CHECK HARNESS AND CONNECTOR (IG0 VOLTAGE)

CHECK BATTERY COOLING BLOWER ASSEMBLY

CHECK HARNESS AND CONNECTOR (BATTERY COOLING BLOWER - POWER MANAGEMENT CONTROL ECU)

CHECK HARNESS AND CONNECTOR (NO. 2 INTEGRATION RELAY - POWER MANAGEMENT CONTROL ECU)

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - BODY GROUND)

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - BODY GROUND)

CHECK HARNESS AND CONNECTOR (NO. 2 INTEGRATION RELAY - BATTERY COOLING BLOWER ASSEMBLY)

REPLACE NO. 2 INTEGRATION RELAY

CHECK HARNESS AND CONNECTOR (NO. 2 INTEGRATION RELAY - BATTERY COOLING BLOWER ASSEMBLY)

CHECK BATTERY COOLING BLOWER ASSEMBLY