BRAKE BOOSTER (for LHD) > INSTALLATION

1. INSTALL BRAKE BOOSTER GASKET

2. INSTALL BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

3. INSTALL NO. 5 BRAKE ACTUATOR BRACKET

4. CONNECT BRAKE ACTUATOR HOSE

5. CONNECT RESERVOIR HOSE

6. INSTALL BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET

7. INSTALL PUSH ROD PIN

8. INSTALL BRAKE PEDAL RETURN SPRING

9. FILL RESERVOIR WITH BRAKE FLUID

10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

11. BLEED BRAKE SYSTEM

12. INSPECT AND ADJUST BRAKE PEDAL

13. OBTAIN ZERO POINT OF YAW RATE AND ACCELERATION SENSOR

14. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

15. INSTALL SUSPENSION TOWER DAMPER (w/ Suspension Tower Damper)

16. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

17. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

18. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

19. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

20. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY