REAR LOWER ARM > INSTALLATION

1. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY

2. INSTALL REAR UPPER COIL SPRING INSULATOR

3. INSTALL REAR LOWER COIL SPRING INSULATOR

4. INSTALL REAR COIL SPRING

5. INSTALL REAR STABILIZER LINK ASSEMBLY

6. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor)

7. INSTALL REAR SUSPENSION MEMBER BRACE

8. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY

9. STABILIZE SUSPENSION

10. FULLY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY

11. INSTALL REAR FLOOR SIDE MEMBER COVER (w/ Floor Under Cover)

12. INSTALL REAR SUSPENSION ARM COVER

13. INSTALL REAR WHEEL

14. FULLY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY

15. INSPECT AND ADJUST REAR WHEEL ALIGNMENT

16. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION (w/ Height Control Sensor)

17. INSPECT AND ADJUST HEADLIGHT AIMING (w/ Height Control Sensor)