REAR TRAILING ARM > INSTALLATION

1. INSTALL REAR TRAILING ARM ASSEMBLY

2. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY

3. INSTALL REAR SPEED SENSOR WIRE

4. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

5. INSTALL REAR FLOOR SIDE MEMBER COVER (w/ Floor Under Cover)

6. INSTALL REAR SUSPENSION ARM COVER

7. INSTALL REAR WHEEL

8. FULLY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY

9. INSPECT AND ADJUST REAR WHEEL ALIGNMENT