REAR SHOCK ABSORBER > INSTALLATION

1. INSTALL REAR NO. 1 SPRING BUMPER

2. TEMPORARILY TIGHTEN REAR SHOCK ABSORBER ASSEMBLY

3. INSTALL REAR SUSPENSION SUPPORT

4. INSTALL REAR SHOCK ABSORBER CUSHION RETAINER

5. STABILIZE SUSPENSION

6. FULLY TIGHTEN REAR SHOCK ABSORBER ASSEMBLY

7. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor)

8. INSTALL REAR SUSPENSION ARM COVER

9. INSTALL REAR WHEEL

10. INSTALL SIDE DECK TRIM SERVICE HOLE COVER

11. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION (w/ Height Control Sensor)

12. INSPECT AND ADJUST HEADLIGHT AIMING (w/ Height Control Sensor)