SEAT BELT CONTROL ECU > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

10. REMOVE FRONT DOOR SCUFF PLATE

11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

13. REMOVE INSTRUMENT SIDE PANEL

14. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

15. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

16. REMOVE ECU INTEGRATION BOX RH (for LHD)

17. REMOVE ECU INTEGRATION BOX LH (for RHD)

18. REMOVE SEAT BELT CONTROL ECU (for LHD)

19. REMOVE SEAT BELT CONTROL ECU (for RHD)