AIRBAG CUT-OFF SWITCH > INSTALLATION

1. INSTALL AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY

2. INSTALL INSTRUMENT SIDE PANEL RH

3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

5. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

6. INSTALL DECK FLOOR BOX RH

7. INSTALL REAR NO. 3 FLOOR BOARD

8. INSTALL REAR DECK FLOOR BOX

9. INSTALL REAR NO. 2 FLOOR BOARD

10. PERFORM DIAGNOSTIC SYSTEM CHECK

11. INSPECT SRS WARNING LIGHT