EGR VALVE > INSTALLATION

1. INSTALL WIRE HARNESS CLAMP BRACKET

2. INSTALL EGR VALVE ASSEMBLY

3. INSTALL EGR PIPE ASSEMBLY

4. INSTALL AIR CLEANER CASE

5. INSTALL INLET AIR CLEANER ASSEMBLY

6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

7. INSTALL NO. 2 CYLINDER HEAD COVER

8. ADD COOLANT (for Engine)

9. INSPECT FOR COOLANT LEAK (for Engine)

10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

11. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

12. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

13. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

14. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

15. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

16. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

17. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

18. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY