EGR COOLER > INSTALLATION

1. INSTALL EGR COOLER SUB-ASSEMBLY

2. INSTALL EGR PIPE ASSEMBLY

3. INSTALL AIR CLEANER CASE

4. INSTALL INLET AIR CLEANER ASSEMBLY

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

6. INSTALL NO. 2 CYLINDER HEAD COVER

7. ADD COOLANT (for Engine)

8. INSPECT FOR COOLANT LEAK (for Engine)

9. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

11. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

12. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

13. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

14. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

15. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

16. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

17. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY