MOTOR CABLE > INSTALLATION

1. INSTALL MOTOR CABLE

2. INSTALL INVERTER TRAY BRACKET

3. INSTALL INVERTER RESERVE TANK ASSEMBLY

4. INSTALL INVERTER WITH CONVERTER ASSEMBLY

5. CONNECT WATER HOSE

6. CONNECT NO. 2 ENGINE ROOM WIRE

7. REMOVE INVERTER COVER

8. CONNECT NO. 2 ENGINE WIRE

9. CONNECT MOTOR CABLE

10. CONNECT GENERATOR CABLE

11. CONNECT FRAME WIRE

12. CHECK HIGH VOLTAGE CABLE CONNECTION

13. INSTALL INVERTER COVER

14. INSTALL ENGINE ROOM MAIN WIRE

15. INSTALL NO. 1 INVERTER BRACKET

16. INSTALL SERVICE PLUG GRIP

17. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

18. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

19. INSTALL DECK FLOOR BOX RH

20. INSTALL REAR NO. 3 FLOOR BOARD

21. INSTALL REAR DECK FLOOR BOX

22. INSTALL REAR NO. 2 FLOOR BOARD

23. ADD COOLANT (for Inverter)

24. INSPECT FOR COOLANT LEAK (for Inverter)

25. INSTALL RADIATOR SUPPORT OPENING COVER

26. INSTALL INVERTER COVER ASSEMBLY LH (w/ Cover)

27. INSTALL NO. 1 ENGINE UNDER COVER

28. INSTALL FRONT LOWER BUMPER ABSORBER