MOTOR CABLE > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

8. REMOVE SERVICE PLUG GRIP

9. REMOVE FRONT LOWER BUMPER ABSORBER

10. REMOVE NO. 1 ENGINE UNDER COVER

11. DRAIN COOLANT (for Inverter)

12. REMOVE INVERTER COVER ASSEMBLY LH (w/ Cover)

13. REMOVE RADIATOR SUPPORT OPENING COVER

14. REMOVE NO. 1 INVERTER BRACKET

15. DISCONNECT ENGINE ROOM MAIN WIRE

16. REMOVE INVERTER COVER

17. CHECK TERMINAL VOLTAGE

18. DISCONNECT FRAME WIRE

19. DISCONNECT GENERATOR CABLE

20. DISCONNECT MOTOR CABLE

21. DISCONNECT NO. 2 ENGINE WIRE

22. INSTALL INVERTER COVER

23. DISCONNECT NO. 2 ENGINE ROOM WIRE

24. DISCONNECT WATER HOSE

25. REMOVE INVERTER WITH CONVERTER ASSEMBLY

26. REMOVE INVERTER RESERVE TANK ASSEMBLY

27. REMOVE INVERTER TRAY BRACKET

28. REMOVE MOTOR CABLE