GENERATOR CABLE > INSTALLATION

1. INSTALL GENERATOR CABLE

2. INSTALL RADIATOR PIPE

3. INSTALL INVERTER TRAY BRACKET

4. INSTALL INVERTER RESERVE TANK ASSEMBLY

5. INSTALL INVERTER WITH CONVERTER ASSEMBLY

6. CONNECT WATER HOSE

7. CONNECT NO. 2 ENGINE ROOM WIRE

8. REMOVE INVERTER COVER

9. CONNECT NO. 2 ENGINE WIRE

10. CONNECT MOTOR CABLE

11. CONNECT GENERATOR CABLE

12. CONNECT FRAME WIRE

13. CHECK HIGH VOLTAGE CABLE CONNECTION

14. INSTALL INVERTER COVER

15. INSTALL ENGINE ROOM MAIN WIRE

16. INSTALL NO. 1 INVERTER BRACKET

17. INSTALL SERVICE PLUG GRIP

18. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

19. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

20. INSTALL DECK FLOOR BOX RH

21. INSTALL REAR NO. 3 FLOOR BOARD

22. INSTALL REAR DECK FLOOR BOX

23. INSTALL REAR NO. 2 FLOOR BOARD

24. ADD COOLANT (for Inverter)

25. ADD COOLANT (for Engine)

26. INSPECT FOR COOLANT LEAK (for Inverter)

27. INSPECT FOR COOLANT LEAK (for Engine)

28. INSTALL RADIATOR SUPPORT OPENING COVER

29. INSTALL INVERTER COVER ASSEMBLY LH (w/ Cover)

30. INSTALL NO. 1 ENGINE UNDER COVER

31. INSTALL FRONT LOWER BUMPER ABSORBER