GENERATOR CABLE > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

8. REMOVE SERVICE PLUG GRIP

9. REMOVE FRONT LOWER BUMPER ABSORBER

10. REMOVE NO. 1 ENGINE UNDER COVER

11. DRAIN COOLANT (for Engine)

12. DRAIN COOLANT (for Inverter)

13. REMOVE INVERTER COVER ASSEMBLY LH (w/ Cover)

14. REMOVE RADIATOR SUPPORT OPENING COVER

15. REMOVE NO. 1 INVERTER BRACKET

16. DISCONNECT ENGINE ROOM MAIN WIRE

17. REMOVE INVERTER COVER

18. CHECK TERMINAL VOLTAGE

19. DISCONNECT FRAME WIRE

20. DISCONNECT GENERATOR CABLE

21. DISCONNECT MOTOR CABLE

22. DISCONNECT NO. 2 ENGINE WIRE

23. INSTALL INVERTER COVER

24. DISCONNECT NO. 2 ENGINE ROOM WIRE

25. DISCONNECT WATER HOSE

26. REMOVE INVERTER WITH CONVERTER ASSEMBLY

27. REMOVE INVERTER RESERVE TANK ASSEMBLY

28. REMOVE INVERTER TRAY BRACKET

29. REMOVE RADIATOR PIPE

30. REMOVE GENERATOR CABLE