BRAKE BOOSTER PUMP > INSTALLATION

1. INSTALL BRAKE BOOSTER PUMP ASSEMBLY

2. INSTALL BRAKE BOOSTER PUMP ASSEMBLY WITH BRACKET

3. INSTALL NO. 5 BRAKE ACTUATOR BRACKET (for RHD)

4. CONNECT BRAKE ACTUATOR HOSE (for RHD)

5. BLEED RESERVOIR TUBE ASSEMBLY (for RHD)

6. INSTALL BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET (for RHD)

7. INSTALL FRONT NO. 4 BRAKE TUBE (for LHD)

8. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

9. INSTALL BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY (for LHD)

10. FILL RESERVOIR WITH BRAKE FLUID (for RHD)

11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for RHD)

12. BLEED BRAKE SYSTEM (for RHD)

13. INSTALL SUSPENSION TOWER DAMPER (for RHD with Suspension Tower Damper)

14. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

15. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

16. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

17. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

18. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (for RHD)