HARD DISK DRIVE > INSTALLATION

1. INSTALL HARD DISK DRIVE (for Two Screw Type)

2. INSTALL HARD DISK DRIVE (for One Screw Type)

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY WITH BRACKET

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

8. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

9. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

11. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

12. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

15. INSTALL DECK FLOOR BOX RH

16. INSTALL REAR NO. 3 FLOOR BOARD

17. INSTALL REAR DECK FLOOR BOX

18. INSTALL REAR NO. 2 FLOOR BOARD

19. INSPECT HARD DISK DRIVE