COMBINATION SWITCH > INSTALLATION

1. INSTALL COMBINATION SWITCH ASSEMBLY

2. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

4. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

5. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

8. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

9. INSTALL DECK FLOOR BOX RH

10. INSTALL REAR NO. 3 FLOOR BOARD

11. INSTALL REAR DECK FLOOR BOX

12. INSTALL REAR NO. 2 FLOOR BOARD