HEADLIGHT LEVELING ECU (for RHD) > INSTALLATION

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

3. INSTALL INSTRUMENT SIDE PANEL RH

4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

8. INSTALL DECK FLOOR BOX RH

9. INSTALL REAR NO. 3 FLOOR BOARD

10. INSTALL REAR DECK FLOOR BOX

11. INSTALL REAR NO. 2 FLOOR BOARD

12. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

13. ADJUST HEADLIGHT AIMING