FRONT LOWER SUSPENSION ARM > REMOVAL

for Preparation Click here


HINT:
The front lower No. 1 suspension arm sub-assembly LH can be removed directly from the vehicle.



1. REMOVE FRONT WHEELS


2. REMOVE NO. 1 ENGINE UNDER COVER


3. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    C205578

  1. Remove the bolt and 2 nuts, and separate the front lower No. 1 suspension arm sub-assembly from the front lower ball joint assembly.



4. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    C234248

  1. Remove the 2 bolts, nut, and front lower No. 1 suspension arm sub-assembly LH from the front suspension crossmember sub-assembly.

    NOTICE:
    Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



5. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
(Click here)