AUDIO AND VISUAL SYSTEM (w/ Navigation System) > Disc cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.PRESS EJECT AND CHECK OPERATION

  1. Press the disc eject switch of the radio receiver assembly for 2 seconds or more and check that the disc is ejected.

    OK:
    Disc is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK


2.REPLACE DISC AND RECHECK

  1. Replace the disc with a known good one and recheck.

    OK:
    Disc is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END