AUDIO AND VISUAL SYSTEM (w/o Navigation System) > CD cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.PRESS "EJECT" AND CHECK OPERATION

  1. Press the CD eject switch of the radio receiver assembly for 2 seconds or more and check that the CD is ejected.

    OK:
    CD is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK


2.REPLACE CD AND RECHECK

  1. Replace the CD with a known good one and recheck.

    OK:
    CD is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END