AUDIO AND VISUAL SYSTEM (w/ Navigation System) > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152

  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2.CHECK DISC


    I100151

  1. Check the disc.

    OK:
    The disc is clean.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN DISC
OK


3.CHECK OPERATION

  1. Check if the same problem occurs again using a known good disc.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END 

4.CHECK RADIO RECEIVER ASSEMBLY

  1. Check that the radio receiver assembly is properly installed.

    OK:
    Radio receiver assembly is properly installed.



NG
REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)