LIGHTING SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION

  1. Lighting system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and to repair.


CHECK DLC3

  1. Check the DLC3 (Click here).


INSPECT AUXILIARY BATTERY VOLTAGE

  1. Measure the auxiliary battery voltage with the power switch off.

    Standard Voltage:
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the auxiliary battery.