NAVIGATION SYSTEM (for HDD) > Route cannot be Calculated

for Preparation Click here

INSPECTION PROCEDURE

1. Confirm the information about the situation when the route calculation did not complete.
   

   Result:

   Result	Proceed to
   Route cannot be calculated for any destination.	A
   A road in the route is closed or has not been officially opened yet.	B
   A ferry crossing is included in the route.	B
   The destination is too close.	B
   The route cannot be calculated only when driving on a bumpy road.	B

   HINT:

   A route cannot be calculated if the route is unavailable, a ferry crossing is included in the route, the destination is too close or when driving on bumpy roads.

B	NORMAL OPERATION

A

1. Replace the hard disk drive (Click here).
   

2. Set another destination and check if the system can calculate the route correctly.
   

   OK:

   Route can be correctly calculated.
   

NG	PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)

OK
END