SEAT HEATER SYSTEM > PRECAUTION

for Preparation Click here



NOTICE:
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.

System Name
See Procedure
Parking Assist Monitor System
 Click here
Power Door Lock Control System


1.PRECAUTIONS WHEN USING INTELLIGENT TESTER

  1. When using the intelligent tester with the power switch off to troubleshoot:
    Connect the intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.

  2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).