POWER OUTLET SOCKET > INSTALLATION



1. INSTALL POWER OUTLET SOCKET COVER

  1. Engage the 2 claws to install the power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET ASSEMBLY


    E218694

  1. As shown in the illustration, align the protrusion of the power outlet socket assembly and the notch of the power outlet socket cover.

  1. Engage the 2 claws to install the power outlet socket assembly to power outlet socket cover.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. Connect each connector.

  1. Engage the clamp.



    B269924

  1. Engage the 12 claws to install the upper console panel sub-assembly.

    NOTICE:
    When installing the upper console panel sub-assembly, make sure not to pinch the wire harness connected to the front end of the remote touch (w/ Navigation System).

  1. Close the console compartment door.



4. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

  1. Engage the 3 guides, clip and 4 claws to install the upper No. 1 console panel garnish.



5. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

  1. Engage the 2 guides, clip and 5 claws to install the upper No. 2 console panel garnish.



6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    B271367

  1. Engage the 4 guides and 7 claws to install the lower center instrument panel finish panel.

  1. Close the glove compartment door.