POWER OUTLET SOCKET > REMOVAL



1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

  1. Open the glove compartment door.



    B271366

  1. Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.



2. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    B269919

  1. Disengage the 5 claws, clip and 2 guides, and remove the upper No. 2 console panel garnish.



3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    B269921

  1. Disengage the 4 claws, clip and 3 guides, and remove the upper No. 1 console panel garnish.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. Open the console compartment door.



    B269923

  1. Using a moulding remover, disengage the 12 claws.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the upper console panel sub-assembly.



5. REMOVE POWER OUTLET SOCKET ASSEMBLY


    E218684

  1. Turn the power outlet socket assembly in the direction shown in the illustration to disengage the claw.



    E218686

  1. Using a screwdriver, disengage the claw, and then push in the power outlet socket assembly until the protrusion of the power outlet socket assembly comes into contact with the power outlet socket cover.



    E218688

  1. As shown in the illustration, align the protrusion of the power outlet socket assembly and the notch of the power outlet socket cover.



    E218690

  1. Using a screwdriver, disengage the claw and remove the power outlet socket assembly from the power outlet socket cover.



6. REMOVE POWER OUTLET SOCKET COVER


    E218692

  1. Disengage the 2 claws and remove the power outlet socket cover.