CRUISE CONTROL SYSTEM > ROAD TEST

for Preparation Click here



PROBLEM SYMPTOM CONFIRMATION


    E107085E11

  1. Inspect the SET function.
    Text in Illustration 
    *a
    		ON/OFF
    *b
    		-/SET

    1. Turn the cruise control switch (ON-OFF button) on.

    2. Check that the cruise control indicator light illuminates on the combination meter assembly.

    3. Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).



      4. E222575E01

    4. Push the cruise control switch to -/SET.
      Text in Illustration 
      *1
      		Cruise Control Indicator Light
      *2
      		Multi-information Display
      *3
      		Cruise Control SET Indication

    5. Check that "SET" is displayed on the multi-information display.

    6. After releasing the switch, check that the vehicle cruises at the set speed.



    2. E171625E05

  2. Inspect the + function.
    Text in Illustration 
    *a
    		ON/OFF
    *b
    		-/SET
    *c
    		+/RES

    1. Turn the cruise control switch (ON-OFF button) on.

    2. Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

    3. Push the cruise control switch to -/SET.

    4. Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle cruises at the newly set speed when the switch is released.

    5. Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1 mph) (tap-up control).



    3. E107085E11

  3. Inspect the - function.
    Text in Illustration 
    *a
    		ON/OFF
    *b
    		-/SET

    1. Turn the cruise control switch (ON-OFF button) on.

    2. Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

    3. Push the cruise control switch to -/SET.

    4. Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle cruises at the newly set speed when the switch is released.

    5. Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1 mph) (tap-down control).



    4. E174951E02

  4. Inspect the CANCEL function.
    Text in Illustration 
    *a
    		ON/OFF
    *b
    		-/SET
    *c
    		CANCEL

    1. Turn the cruise control switch (ON-OFF button) on.

    2. Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

    3. Push the cruise control switch to -/SET.

    4. When performing any one of the following, check that the operation of the cruise control system is cancelled, normal driving resumes and "SET" on the multi-information display goes off.

      1. Depressing the brake pedal
      2. Moving the shift lever from D to any other position
      3. Turning the cruise control switch off
      4. Pulling the cruise control switch to CANCEL



    5. E171625E05

  5. Inspect the RES function.
    Text in Illustration 
    *a
    		ON/OFF
    *b
    		-/SET
    *c
    		+/RES

    1. Turn the cruise control switch (ON-OFF button) on.

    2. Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

    3. Push the cruise control switch to -/SET.

    4. Cancel cruise control operation by performing any of the above operations (other than turning the cruise control switch off).

    5. After pushing the cruise control switch to +/RES at a speed of more than approximately 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation and that "SET" is also displayed on the multi-information display.