KNEE AIRBAG ASSEMBLY (for Front Passenger Side) > ON-VEHICLE INSPECTION

for Preparation Click here


CAUTION:
Be sure to correctly follow the removal and installation procedures for the lower No. 2 instrument panel airbag assembly.



1. INSPECT LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

  1. Perform a diagnostic system check (Click here).

  1. Visually check for defects with the lower No. 2 instrument panel airbag assembly installed on the vehicle.

    1. The defects are as follows:

      1. Cuts on the lower No. 2 instrument panel airbag assembly
      2. Small cracks on the lower No. 2 instrument panel airbag assembly
      3. Significant discoloration on the lower No. 2 instrument panel airbag assembly

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the lower No. 2 instrument panel airbag assembly with a new one.



2. INSPECT LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

  1. Perform a diagnostic system check (Click here).

  1. Visually check for defects with the lower No. 2 instrument panel airbag assembly removed from the vehicle.

    1. The defects are as follows:

      1. Cuts on the lower No. 2 instrument panel airbag assembly
      2. Small cracks on the lower No. 2 instrument panel airbag assembly
      3. Significant discoloration on the lower No. 2 instrument panel airbag assembly
      4. Cracks or other damage to the connector
      5. Deformation or cracks on the instrument panel or instrument panel reinforcement

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the lower No. 2 instrument panel airbag assembly, instrument panel or instrument panel reinforcement with a new one.