Dynamic Radar Cruise Control System
Symptom
| Suspected Area
| See page
|
The cruise control switch (ON-OFF button) cannot be turned on.
| Driving support ECU power source circuit
|
Click here
|
Cruise control switch circuit
|
Click here
|
Cruise main indicator light circuit
|
Click here
|
Power management control ECU
|
Click here
|
Driving support ECU
|
Click here
|
Setting cannot be changed between constant speed control mode and vehicle-to-vehicle distance control mode.
| Cruise control switch circuit
|
Click here
|
Combination meter assembly
|
Click here
|
Driving support ECU
|
Click here
|
Set distance cannot be changed.
| Distance control switch circuit
|
Click here
|
Combination meter assembly
|
Click here
|
Driving support ECU
|
Click here
|
Setting cannot be canceled in vehicle-to-vehicle distance control mode.
| Combination meter assembly
|
Click here
|
Millimeter wave radar sensor assembly
|
Click here
|
Driving support ECU
|
Click here
|
Vehicle speed setting cannot be performed. (The cruise control indicator light on combination meter illuminates when the cruise control switch is turned on, but turns off when operating SET function.)
| Cruise control switch circuit
|
Click here
|
Driving support ECU
|
Click here
|
Vehicle speed setting cannot be performed with the constant speed mode. (The cruise control indicator light on combination meter illuminates when the cruise control switch is turned on, and remains on when operating SET function is operating.)
| Stop light switch circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Cruise control switch circuit
|
Click here
|
Hybrid control system
|
Click here
|
Driving support ECU
|
Click here
|
Vehicle speed setting cannot be performed with the vehicle-to-vehicle distance control mode. (The cruise control indicator light on combination meter illuminates when cruise control switch is turned on, and remains on when SET function is operating.)
| Millimeter wave radar sensor
|
Click here
|
Stop light switch circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Cruise control switch circuit
|
Click here
|
Hybrid control system
|
Click here
|
Wiper signal circuit
|
Click here
|
Electronically controlled brake system
|
Click here
|
While vehicle is driven with cruise control on, the control is canceled.
| Stop light switch circuit
|
Click here
|
Hybrid control system
|
Click here
|
Electronically controlled brake system
|
Click here
|
Cruise control switch circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Wiper signal circuit
|
Click here
|
Driving support ECU
|
Click here
|
Pulling back on the cruise control switch does not cancel the cruise control. (The cruise control indicator light remains on.)
| Cruise control switch circuit
|
Click here
|
Driving support ECU
|
Click here
|
Pulling back on the control switch does not cancel the cruise control. (The cruise control indicator light goes off.)
| Driving support ECU
|
Click here
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise control indicator light remains on.)
| Vehicle speed sensor circuit
|
Click here
|
Driving support ECU
|
Click here
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise control indicator light goes off.)
| Hybrid control system
|
Click here
|
Driving support ECU
|
Click here
|
Depressing the brake pedal does not cancel the cruise control. (The cruise control indicator light remains on.)
| Stop light switch circuit
|
Click here
|
Driving support ECU
|
Click here
|
Depressing the brake pedal does not cancel the cruise control. (The cruise control indicator light goes off.)
| Driving support ECU
|
Click here
|
Vehicle speed cannot be canceled with wiper HI. (The cruise control indicator light remains on.)
| Wiper signal circuit
|
Click here
|
Driving support ECU
|
Click here
|
Vehicle speed cannot be canceled with wiper HI. (The cruise control indicator light goes off.)
| Hybrid control system
|
Click here
|
Driving support ECU
|
Click here
|
Moving the shift lever does not cancel the cruise control. (The cruise control indicator light remains on.)
| Hybrid control system
|
Click here
|
Driving support ECU
|
Click here
|
Moving the shift lever does not cancel the cruise control. (The cruise control indicator light goes off.)
| Driving support ECU
|
Click here
|
Hunting (Speed is not constant.)
| Millimeter wave radar sensor assembly
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
SFI system
|
Click here
|
Hybrid control system
|
Click here
|
Driving support ECU
|
Click here
|
Even though front millimeter wave radar sensor is not dirty, CLEAN RADAR SENSOR is displayed.
| Millimeter wave radar sensor assembly is dirty
| -
|
Adjust front millimeter wave radar sensor assembly
|
Click here
|
Millimeter wave radar sensor assembly
|
Click here
|
No information on the multi-information display
| Combination meter assembly
|
Click here
|
Beam axis of millimeter wave radar sensor cannot be adjusted (completed).
| Check position, distance and angle of reflector
|
Click here
|
Check installation of millimeter wave radar sensor
|
Click here
|
Millimeter wave radar sensor assembly
|
Click here
|
Driving support ECU
|
Click here
|
Alarm buzzer does not sound.
| Power management control ECU
|
Click here
|
Skid control buzzer circuit
|
Click here
|
Electronically controlled brake system
|
Click here
|
Millimeter wave radar sensor assembly
|
Click here
|
Driving support ECU
|
Click here
|
No brake control (when decelerating)
| Combination meter
|
Click here
|
Electronically controlled brake system
|
Click here
|
Driving support ECU
|
Click here
|
"SET" is not displayed on the multi-information display. (SET function operates normally.)
| Combination meter assembly
|
Click here
|
Driving support ECU
|
Click here
|
The cruise control indicator light remains blinking.
| TC and CG terminal circuit
|
Click here
|
Driving support ECU
|
Click here
|