PRE-CRASH SAFETY SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Pre-Crash / DTC.

  5. Enter the following menus: Body / Pre-Crash 2 / DTC.

  6. Check the details of the DTC(s) (Click here).

HINT:
As the driving support ECU and seat belt control ECU output DTCs for the pre-crash system, be sure to check the Pre-Crash and Pre-Crash 2 DTCs.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Pre-Crash / DTC.

  5. Enter the following menus: Body / Pre-Crash 2 / DTC.

  6. Clear the DTCs.

HINT:
As the driving support ECU and seat belt control ECU output DTCs for the pre-crash system, be sure to clear the Pre-Crash and Pre-Crash 2 DTCs.