BATTERY BLOWER > INSTALLATION |
| 1. INSTALL BATTERY COOLING BLOWER ASSEMBLY |
Install the battery cooling blower assembly with the 2 bolts and nut.
Connect the battery cooling blower assembly connector and clamp.
Connect the 2 wire harness clamps.
| 2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT |
Install the No. 1 hybrid battery intake duct with the 2 clips.
| 3. INSTALL REAR FLOOR BOARD SPACER |
Install the rear floor board spacer with the 2 clips.
| 4. INSTALL REAR SEAT SIDE GARNISH RH |
| 5. INSTALL REAR DOOR SCUFF PLATE RH |
| 6. INSTALL REAR SEATBACK ASSEMBLY RH |
| 7. INSTALL REAR NO. 1 FLOOR BOARD |
Engage the 2 claws and 2 clips.
Install the rear No. 1 floor board with the bolt.
| 8. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY |
Engage the claw and 2 clips to install the rear No. 2 floor board sub-assembly.
| 9. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY |
Engage the 2 claws and 2 clips to install the rear No. 1 floor board sub-assembly.
| 10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Install the tonneau cover assembly.
| 11. INSTALL DECK FLOOR BOX LH (w/o Woofer) |
Engage the 6 guides.
Install the deck floor box LH with the clip.
| 12. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer) |
Engage the 2 clips and 3 guides to install the rear No. 4 floor board.
| 13. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer) |
Install the rear No. 4 floor board.
| 14. INSTALL DECK FLOOR BOX RH |
Engage the 6 guides.
Install the deck floor box RH with the clip.
| 15. INSTALL REAR NO. 3 FLOOR BOARD |
Install the rear No. 3 floor board.
| 16. INSTALL REAR DECK FLOOR BOX |
Install the rear deck floor box.
| 17. INSTALL REAR NO. 2 FLOOR BOARD |
Install the rear No. 2 floor board.