RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FUEL OPN RELAY


    B273671E02

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    3 - 5
    		Battery voltage applied to terminals 1 and 2
    		Below 1 Ω
    3 - 5
    		Battery voltage not applied between terminals 1 and 2
    		10 kΩ or higher

    If the result is not as specified, replace the FUEL OPN relay.