PUSH-BUTTON START SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to the system before inspecting the suspected areas below.


Push-button Start System 
Symptom
Suspected Area
See page
Power source mode does not change to on (IG) or on (ACC)
Refer to "Power Source Mode does not Change to ON (IG and ACC)"
 Click here
Power source mode does not change to on (IG)
Refer to "Power Source Mode does not Change to ON (IG)"
 Click here
Power source mode does not change to on (ACC)
Refer to "Power Source Mode does not Change to ON (ACC)"
 Click here
Power source mode does not change to on (READY)
Refer to "Power Source Mode does not Change to ON (READY)"
 Click here
Room Oscillator does not Recognize Key
Refer to "Room Oscillator does not Recognize Key"
 Click here
Outside Warning Buzzer does not Sound
Wireless door lock control system
 Click here
Certification ECU (smart key ECU assembly)
-
Interior Warning Buzzer does not Sound
Refer to "Warning Buzzer does not Sound"
 Click here