DTC    C1300    Skid Control ECU Malfunction

for Preparation Click here


DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC Code
INF Code
DTC Detection Condition
Trouble Area
C1300
-
Skid control ECU internal malfunction.
Brake booster with master cylinder (Skid control ECU)

INSPECTION PROCEDURE

1.REPLACE BRAKE BOOSTER WITH MASTER CYLINDER

  1. Replace the brake booster with master cylinder (skid control ECU) (Click here for LHD or Click here for RHD).

  1. Perform initialization and calibration of the linear solenoid valve (Click here).

  1. Perform the zero point calibration of the yaw rate and acceleration sensor (Click here).

  1. Perform the sensor check in the Test Mode procedure (Click here).


NEXT

END