FRONT SEATBACK HEATER (for Manual Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT BACK HEATER (SEPARATE TYPE FRONT SEAT BACK COVER)


    B081969E08

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		Seat heater switch on
    		4.23 to 5.07 Ω

    Text in Illustration 
    *a
    		Component without harness connected
    (Front Seat Back Heater (Separate Type Front Seat Back Cover))
    If the result is not as specified, replace the front seat back heater (separate type front seat back cover).