FRONT SEAT CUSHION HEATER (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    B270969E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-1 - B-1
    		Always
    		Below 1 Ω
    A-4 - B-2
    		Always
    		Below 1 Ω
    A-1 - A-4
    		Always
    		3.21 to 3.85 Ω
    B-1 - B-2
    		Always
    		3.39 to 4.07 Ω
    A-2 - A-3
    		15°C (59°F) to 30°C (86°F)
    		4.9 to 8.2 kΩ

    Text in Illustration 
    *a
    		Component without harness connected
    (Front Seat Cushion Heater (Separate Type Front Seat Cushion Cover))
    If the result is not as specified, replace the front seat cushion heater (separate type front seat cushion cover).