FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat)


    B265206E01

  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    		Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Engage each clamp under the front seat assembly.

  1. Connect each connector.



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Seat)


    B265208E01

  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    		Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Engage each clamp under the front seat assembly.

  1. Connect each connector.



3. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Seat)


    B270248

  1. Engage the clip.

  1. Engage the 11 claws.

  1. Install the front seat cushion shield with the screw.



4. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Seat)
for 6 Way Seat Type: (Click here)


5. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Driver Seat)


    B270244

  1. Engage the claw to install the reclining adjuster release handle.



6. INSTALL FRONT SEAT ASSEMBLY
(Click here)