FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    B265204E01

  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    		Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Engage the clamp.

  1. Engage each clamp under the front seat assembly.

  1. Connect each connector.



2. INSTALL FRONT SEAT ASSEMBLY
(Click here)