FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Driver Seat)


    B270242E01

  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
    Text in Illustration 
    *1
    		Protective Tape



3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Seat)
for 6 Way Seat Type: (Click here)


4. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Seat)


    B270248

  1. Remove the screw.

  1. Disengage the 11 claws and clip, and remove the front seat cushion shield.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat)

  1. Disconnect each connector.

  1. Disengage each clamp under the front seat assembly.



    B265207

  1. Remove the nut and front seat inner belt assembly.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Seat)

  1. Disconnect each connector.

  1. Disengage each clamp under the front seat assembly.



    B265209

  1. Remove the nut and front seat inner belt assembly.