AUDIO AND VISUAL SYSTEM (w/o Navigation System) > The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CELLULAR PHONE

  1. Check if the other caller's voice can be heard properly.

    OK:
    The other caller's voice can be heard properly.

    HINT:
    The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


2.CHECK AUDIO AND VISUAL SYSTEM

  1. Check that sound from the audio system can be heard from the front speaker.

    OK:
    Sound from the audio system can be heard.

    HINT:
    If sound from the audio system cannot be heard, proceed to "No sound can be heard from speakers (Audio is mute.)." in Problem Symptoms Table (Click here).



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3.CHECK SETTINGS

  1. Check that the received voice level setting on the cellular phone is not too low.

    OK:
    The received voice level setting is not too low.



NG
SET VOLUME TO HIGH
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)