INNER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ REAR VIEW MONITOR SYSTEM, w/o NAVIGATION SYSTEM)


  1. Inspect the operation of the electrochromic inner mirror.


    B273026E01


    Text in Illustration 
    *1
    		Forward Sensor
    		*2
    		Black Colored Tape
    *3
    		Bright
    		*4
    		Dark
    *5
    		Battery
    		-
    		-
    *a
    		Component without harness connected
    (Inner Rear View Mirror)
    		-
    		-

    1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

    2. Press the AUTO switch.

    3. Attach black colored tape to the forward sensor to prevent it from sensing.

    4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.



2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o REAR VIEW MONITOR SYSTEM)


  1. Inspect the operation of the electrochromic inner mirror.


    B273027E01


    Text in Illustration 
    *1
    		Forward Sensor
    		*2
    		Black Colored Tape
    *3
    		Bright
    		*4
    		Dark
    *5
    		Battery
    		-
    		-
    *a
    		Component without harness connected
    (Inner Rear View Mirror)
    		-
    		-

    1. Connect a positive (+) lead from the battery to terminal 4 and a negative (-) lead to terminal 1.

    2. Press the AUTO switch.

    3. Attach black colored tape to the forward sensor to prevent it from sensing.

    4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.