FRONT PILLAR UPPER COVER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER

HINT:
When installing a new front door front lower frame upper cover, heat the vehicle body using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the vehicle body or moulding excessively.

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new front door front lower frame upper cover.

    1. Using a heat light, heat the vehicle body and a new front door front lower frame upper cover.

    2. Remove the release paper from the front door front lower frame upper cover.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Engage the 2 clips and install the new front door front lower frame upper cover.



2. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B266080

  1. Engage the clip and claws, and install the front door lower frame bracket garnish.