HORN > INSPECTION

for Preparation Click here



1. INSPECT LOW PITCHED HORN ASSEMBLY


    E193721E01

  1. Apply auxiliary battery voltage and check the operation of the horn according to the table below.

    OK:
    Measurement Condition
    		Specified Condition
    Auxiliary battery positive (+) → Terminal 1 (B)
    Auxiliary battery negative (-) → Body ground
    		Horn sounds

    If the result is not as specified, replace the low pitched horn assembly.



2. INSPECT HIGH PITCHED HORN ASSEMBLY


    E193722E01

  1. Apply auxiliary battery voltage and check the operation of the horn according to the table below.

    OK:
    Measurement Condition
    		Specified Condition
    Auxiliary battery positive (+) → Terminal 1 (B)
    Auxiliary battery negative (-) → Body ground
    		Horn sounds

    If the result is not as specified, replace the high pitched horn assembly.