LUGGAGE COMPARTMENT ROOM LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 2 ROOM LIGHT ASSEMBLY


    E124208E02

  1. Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.

  1. Check that the No. 2 room light comes on.

    OK:
    No. 2 room light comes on.

    Text in Illustration 
    *a
    		Component without harness connected
    (No. 2 Room Light Assembly)
    If the result is not as specified, replace the bulb or No. 2 room light assembly.